Tiller Shaft and blade longevity are the most critical factors for reducing operational costs at ORATEXCA. To ensure your equipment performs at its peak throughout the farming season, consistent maintenance is required. In this guide, we will share five professional tips to keep your tiller shaft in top-tier condition.
1. Daily Cleaning After Use
Soil and plant debris wrapped around the tiller shaft can cause significant friction and seal wear. Always clear away mud and vines after each shift to prevent long-term damage to the bearing housing.
2. Proper Lubrication Schedule
Friction is the enemy of any tiller shaft system. Ensure you apply high-quality grease to the drive side and bearing points every 50 hours of operation. This simple step prevents overheating and metal fatigue.
3. Inspecting Bolt Tension
As we discussed in our previous guide, the connecting bolts on the tiller shaft can loosen due to high-frequency vibrations. Regularly check these bolts to ensure the shaft remains perfectly aligned within the frame.
4. Monitoring Blade Wear
Worn-out blades put extra strain on the tiller shaft and the tractor’s PTO. Replacing your POSCO steel blades before they become too thin will protect the entire drive system from unnecessary stress.
5. Off-Season Storage Preparation
When the season ends, coat the tiller shaft with a thin layer of protective oil to prevent rust. Store the unit on level ground to avoid any structural warping of the side plates or the main frame.
Leave a Reply